Disassembly

  1. Press the release button to open the hard-drive carrier release handle.
  2. Slide the hard-drive carrier out until it is free of the hard-drive slot. 
  3. Remove the screws from the slide rails on the hard drive carrier.
  4. Lift the hard drive out of the hard drive carrier.

1 - Release Button

2 - Hard Drive

3 - Hard Drive Carrier

1 - Screws

2 - Hard Drive

3 - Hard Drive Carrier

Reassembly

  1. Insert the hard drive into the hard drive carrier with the connector end of the hard drive toward the back.
  2. Align the screen holes on the hard drive with the set of screw holes on the hard drive carrier.
  3. When aligned correctly, the back of the hard drive is flush with the back of the hard drive carrier.
  4. Attach the screws to secure the hard drive to the hard drive carrier.
  5. Insert the hard drive carrier into the hard drive slot until the carrier connects with the server.
  6. Close the hard drive carrier handle to lock the hard drive in place.