Zebra GC420d
When connecting two printers to an EZ-Flats machine, the following procedure should be followed after installing the printers. Upon completion of these ste...
Thu, Apr 25, 2019 at 4:07 PM
With the printer power on and top cover closed, press and hold the Feed button for several seconds. The green status LED will flash a number of times in se...
Fri, Jul 20, 2018 at 4:30 PM
Make sure media is loaded and the printer power is on Press and hold the Feed button until the green status light flashes once, then twice, and then conti...
Mon, Aug 5, 2019 at 10:11 AM
In the event that a tray tag printer needs to be tested, test tags may be printed from the Console using the method below. Open the EII Console ...
Wed, Jul 10, 2024 at 3:09 PM