SATO

Instructions for Removing and Replacing SATO S84-EX Printhead
Introduction The printhead of a print engine is responsible for heating the thermal labels to produce text. Should you need to remove the printhead of t...
Thu, Apr 19, 2018 at 2:41 PM
Enabling and Disabling Head Check on SATO printers
Introduction Head Check is a feature that enable the printer to perform a pass-check on labels as they are printed. Head Check is enabled by default and...
Fri, Mar 2, 2018 at 9:06 AM
Gap/Media Sensor Calibration of SATO S84-EX Printer
Introduction  These instructions will allow the printer to automatically calibrate the Gap/Media sensor. All steps are completed on the operator panel, des...
Tue, Feb 20, 2018 at 5:02 PM