EII Applicator
Introduction There are two features that help control the tamp head, the sensor that detects how close to the mail piece the tamp head is, and the air supp...
Wed, Feb 13, 2019 at 8:41 AM
Each time an EZ-Flats Premium machine runs out of labels, follow these steps to replace them. Getting Started Move the empty label core from the upper...
Tue, Apr 9, 2019 at 5:03 PM
If the print on labels processing on an EII Applicator keeps shifting upward, it is possible that the Take-Up Arm or Sensor need to be adjusted. The follow...
Fri, May 25, 2018 at 4:12 PM
The following steps should be followed when replacing a Tamp Sensor. Install tamp sensor and air supply tube. Install the sensor with the cable towa...
Mon, Apr 15, 2019 at 8:16 AM
Scenario/Symptoms: EZ Flats Premium prints a label but does not apply it to the piece even though the piece is under the tamp and activating the Transport ...
Wed, Jan 31, 2024 at 1:19 PM