Sato LT408

Adjusting the Print Height on the Label
If a Sato LT408 printer needs to be adjusted to print higher on the label, the following procedure must be performed: 1)  Press the Line button on the S...
Mon, Aug 20, 2018 at 1:53 PM
Changing the LCD contrast on a Sato LT408 printer
To change the LCD contrast on your Sato LT408 printer: Ensure that your printer is in Online Mode (should list either an Online or Offline notification, alo...
Tue, Jun 5, 2018 at 5:42 PM
Enabling and Disabling Head Check on SATO LT408 printers
Introduction Head Check is a feature that enable the printer to perform a pass-check on labels as they are printed. Head Check is enabled by default and...
Tue, Jun 5, 2018 at 5:39 PM
Gap Sensor Replacement
Warning: This is an ESD sensitive process. A grounding strap MUST be worn for this process, due to the handling of circuitry. For more information, click her...
Wed, Aug 1, 2018 at 2:42 PM
Gap Sensor Setup
Warning: This is an ESD sensitive process. A grounding strap MUST be worn for this process, due to the handling of circuitry. For more information, click her...
Thu, May 23, 2019 at 2:02 PM
Platen Roller Replacement
When replacing the platen rollers in a Sato LT408 printer, the following steps must be performed: Print Head Platen Roller (A) Release the print head ...
Fri, Apr 26, 2019 at 2:35 PM
Print Head Replacement
Before installing the new print head Located on the top side of the print head is a silver backing plate.  This plate is secured by two small Phillips-head...
Thu, Apr 11, 2019 at 5:15 PM