Bleeding Air Pressure from the EZ-Flats Premium.
Modified on: Mon, Mar 26, 2018 at 4:51 PM
There are many times where the airflow must be turned off and the remaining air pressure bled from the EZ-Flats Premium before the main task can be completed. The following steps show you how to achieve this.
Turning off the Air
|1. On the back side of the Premium, locate the red valve that controls the airflow into the machine.|
|2. Turn the red valve one quarter turn, at which point you'll hear a loud pop and hiss of the pressure being released, and the air stop flowing.|
|3. Return to the front of the machine, and go to the display on the applicator.|
|4. Hit the "Line" button to take the machine Offline.|
|5. Hit the "Feed" button, and the machine will print a label, which bleeds out the remaining air.|
|6. You can tell the process worked because the tamp head will slowly drop lower until it is resting on the track.|
The air is now fully bled out.
Turning on the Air
|1. On the back side of the Premium machine, locate the red valve that controls the airflow.|
|2. Turn the valve one quarter rotation, at which point you will hear a constant hissing of air. |
|At this point the tamp will retract upwards into the applicator.|
|3. Return to the front of the machine, and got to the display on the applicator.|
|4. Hit the "Line" button to bring the machine Online.|
The machine is now ready to be returned to service.
Did you find it helpful?
Sorry we couldn't be helpful. Help us improve this article with your feedback.