EZ-Flats

Bleeding Air Pressure from the EZ-Flats Premium.
Introduction  There are many times where the airflow must be turned off and the remaining air pressure bled from the EZ-Flats Premium before the main task ...
Mon, Mar 26, 2018 at 4:51 PM
Endicia Processing on EZ-Flats Premium with Small Labels
If pieces being processed using Endicia will be run on the EZ-Flats Premium, 3" labels must be utilized.  Only the EII Applicator is currently capable ...
Thu, Jul 5, 2018 at 5:04 PM
Entering & Exiting Stacker Burn-In Mode
At times, the stacker will need to be placed in Burn-In Mode to test the hardware functionality of a stacker.  If this is deemed necessary during troublesho...
Mon, Jul 16, 2018 at 10:35 AM
Lowering the Anti-Tip Support After Shipping
Introduction When you receive your EZ-Flats machine from EII, the "kickstand" anti-tip support will have been raised off the ground to avoid bein...
Mon, Mar 26, 2018 at 4:52 PM
Packing the EZ-Flats Premium for Shipping
Introduction Sometimes due to moving facilities, purchasing a used machine, or other similar events it may be necessary for you to ship an EZ-Flats Premium...
Fri, Mar 30, 2018 at 8:46 AM
Replacing the Scale Top's Glass Plate
On every EZ-Flats Premium scale, there should be a glass plate designed to protect the reflective tape. Though we currently deliver our scale tops with the ...
Wed, Feb 28, 2018 at 8:37 AM
Using an Answer File to Create an Optimized Sort Profile
Introduction The purpose of this document is to describe how use an Answer File to generate an Optimized Sort Plan for a Flats Job on the EZ-Flats Premium ...
Tue, Mar 27, 2018 at 8:19 AM